Please refer to the following colocation cabinet data when planning your installation:
Cabinet dimensions: 19" standard data cabinets (designed to accommodate 19" equipment), 42" maximum depth.
- Full cabinet manufacturer specifications: http://www.apc.com/shop/vn/en/products/NetShelter-SV-42U-600mm-Wide-x-1060mm-Deep-Enclosure-with-Sides-Black/P-AR2400
- Split (1/2) cabinet manufacturer specifications: http://www.apc.com/shop/th/en/products/NetShelter-SX-Colocation-2-x-20U-600mm-Wide-x-1070mm-Deep-Enclosure-with-Sides-Black/P-AR3200
Cabinets are outfitted with front and rear square-hole posts. The Z-distance between the front and rear posts is approximately 28"-30".
Typical server railkits will usually fit the cabinets with no adapters needed. If you do not have mounting hardware for your equipment, you can bring a data cabinet shelf, or get one from the facility for a $100 fee.
Please keep 'pole pigs' and 'wall warts' (those power-converters-on-a-plug that come with equipment that lacks a built-in power supply) off of the PDU. They typically cover up at least one extra outlet and eat up cabinet depth clearance as well, as the PDU is mounted on the back door of the cabinet. Use a short commercial grade extension cord to connect the pig to the PDU, please.